|
|
|
Applications |
|
|
|
|
|
|
|
|
|
The Problems |
The Solutions |
|
|
|
We designed and built this system to feed two lines of parts from a single bowl to a point where an assembly machine could load two fixtures at once, thereby doubling the machine output. |
|
|
|
We designed and built a vibratory feeding system that presented these "Springs" to an assembly machine at a rate of one per second. This bowl fed a total of three different variations of this "Spring" with minimal changeover |
|
|
|
The part was .035" thick and the customer had problems with warped parts in the feeding system. We, at American Feeding Systems, designed and built a sorting feeder that removed the warped parts off line. Be removing the bad parts prior to assembly, the performance of the assembly equipment was greatly enhanced |
|
|
|
These "Bobbins" were fed to a coil winding machine. The original bowls were from overseas and were not adequate. Our equipment fit in the existing area and improved efficiency over 40%. American Feeding Systems welcomes your tough or problem type parts. |  |
|
|
This "Clip" was presented to a robot arm for assembly. This type of application eliminates those repetitive operator motions that have become so problematic in the past few years. |  |
|
|
Our experienced staff designed and built a vibratory parts feeding system capable of presenting this part for pick-up at the assembly station. This system supplied parts at a rate of 40 parts per minute. An optional sound reduction enclosure was also incorporated on this system. |  |
 |
Home |
 | ||
|
| ||||
 |
Applications |
 | ||
